Seagull Models Funfly 3D RC Plane Kit - SEA40

The Seagull Models SEA40 Funfly 3D is an ARTF balsa RC plane designed for intermediate to advanced sport flyers looking for a capable 3D funfly aircraft. Built around a traditional balsa and plywood airframe, the SEA40 strikes a balance between structural strength and low flying weight, which is exactly what you want in a plane intended for aerobatics and 3D manoeuvres. Much of the construction is already done for you — motor mount fitted, hinges pre-installed — so you can get to the flying field faster. With a 50.4-inch wingspan and fuselage length of 51.6 inches, this is a full-size sport plane with real presence in the air.

Key Features

• ARTF construction with pre-installed hinges and fitted motor mount reduces bench time significantly
• Balsa and plywood airframe builds lighter than typical foam ARTFs while retaining good rigidity for aerobatic loads
• 50.4in (128cm) wingspan and 51.6in (131cm) length give stable, predictable handling suited to 3D and sport flying
• Designed for .46–.55 two-stroke or .72 four-stroke glow engines, with optional electric conversion available
• Requires a 4-channel radio system with 6 servos — suitable for pilots stepping up from basic trainers

What's Included

• Partially pre-built balsa and plywood airframe (ARTF)
• Pre-installed control surface hinges
• Fitted motor mount

What You Need

• .46–.55 two-stroke or .72 four-stroke glow engine (or electric power system if using the optional conversion)
• 4-channel radio transmitter and receiver
• 6 servos
• Fuel and glow starter equipment (for glow engine setup)
• Appropriate propeller for chosen engine
• Field equipment and tools for final assembly and maiden flight