Gemfan Nitro/Gas/EP 18x6 Scimitar Style Wood RC Propeller - GF-P180060GLW

The Gemfan GF-P180060GLW is an 18x6 scimitar-style beechwood propeller designed for use with nitro, gas, and electric RC aircraft powerplants. Cut from a single piece of beechwood and finished by hand through over thirty production steps including multiple sanding and polishing passes, this RC propeller combines low mass with genuine stiffness — meaning it holds its pitch at high RPM without flexing, keeping power directed into thrust rather than lost to blade deformation. The scimitar blade profile features an elliptical leading edge that distributes thrust more evenly across the blade surface, improving efficiency from root to swept tip.

Key Features

• 18x6 inch sizing — 18-inch diameter with 6-inch pitch — suited to larger nitro, gas, and electric RC aircraft setups
• Single-piece beechwood construction is lighter than nylon and stiffer under load, resisting flex at high RPM
• Elliptical leading edge profile promotes uniform thrust distribution across the full blade span for improved lift and efficiency
• Fumigated and degreased during manufacture to stabilise grain structure and control weight consistency between blades
• Factory balanced and supplied with a 6mm centre hole that can be reamed to suit your chosen prop adapter or collet

What's Included

• 1 x Gemfan GF-P180060GLW 18x6 scimitar-style beechwood propeller

What You Need

• Compatible prop adapter or collet to suit your engine or motor shaft diameter
• Prop reamer if your shaft size requires enlarging the 6mm centre hole
• Prop balancer recommended before first flight to verify balance after any fitting adjustments