TopRC Hobby T1400RTF 1.4m Electric 4ch + Flight Controller Mode2 RC Glider - TRC1400RTF

The TopRC Hobby T1400RTF is a 1.4m wingspan electric RC glider designed for beginner through to experienced pilots looking for a versatile, easy-flying fixed-wing aircraft. With a 1400mm wingspan and a lightweight EPO airframe, the T1400 delivers a stable, efficient flight experience suited to thermal soaring, slope soaring, and general sport flying. The RTF configuration means it arrives ready to fly straight from the box, and the inclusion of a 6-axis flight controller sets this electric glider apart from basic trainer aircraft — offering bank and pitch angle limiting or full flight stability assist depending on the mode selected. The pusher propeller layout keeps the prop safely out of harm's way during hand launches and landings, which is particularly reassuring for newer pilots. At just 590g flying weight, the T1400 is easy to transport even when assembled, fitting comfortably in most small to medium cars.

Key Features

• 1400mm wingspan EPO airframe offers an efficient glide ratio suitable for thermal and slope soaring
• 6-axis flight controller provides two selectable modes — bank and pitch angle limiting, or full stability assist — plus a disable option for experienced pilots flying without assistance
• Pusher prop design places the 5.5x5.5 inch propeller at the rear of the fuselage, reducing prop strike risk on launch and landing
• 2604-1950KV brushless motor paired with a 20A ESC delivers reliable power for climbing and maintaining altitude in light air
• Full 4-channel control setup with ailerons, elevator, rudder, and motor — no need for a separate trainer aircraft to learn proper fixed-wing flying

What's Included

• TopRC Hobby T1400RTF electric glider airframe (assembled)
• 2.4GHz 6-channel transmitter (Mode 2, left-hand throttle)
• 6-axis flight controller (pre-installed)
• 11.1V 3S 1300mAh 20C LiPo flight battery
• 20A brushless ESC (pre-installed)
• 2604-1950KV brushless pusher motor (pre-installed)
• 4 x 9g plastic gear servos (pre-installed)

What You Need

• LiPo battery charger compatible with 3S 11.1V packs (not included)
• Field equipment such as a landing mat or grass area suitable for hand-launch and belly-landing operations