RRP 48 Pitch 24T RC Pinion Gear - RRP1024

The Robinsons Racing RRP1024 is a 48 pitch, 24-tooth pinion gear designed for use in 1/10 and 1/12 scale electric RC cars running a 48 pitch drivetrain. RRP pinion gears are a well-regarded choice among racers looking for a precise, properly cut gear that meshes cleanly with a matching 48 pitch spur gear. The 24T tooth count sits in the mid-range, making it a practical choice for balancing top speed and acceleration depending on your motor and spur gear pairing. If you're rebuilding a stripped drivetrain or fine-tuning your gear ratio, the RRP1024 is a direct, no-fuss solution.

Key Features

• 48 pitch tooth profile — must be paired with a compatible 48 pitch spur gear for correct mesh
• 24-tooth count offers a balance between top speed and low-end torque depending on spur gear selection
• Suitable for 1/10 and 1/12 scale electric RC cars using a standard 48 pitch drivetrain
• From Robinsons Racing Products, a specialist RC drivetrain component manufacturer
• Gear ratio can be adjusted by pairing this pinion with different 48 pitch spur gear tooth counts

Compatible With

• RC cars running a 48 pitch drivetrain
• 1/10 scale electric on-road and off-road RC cars with 48 pitch spur gears
• 1/12 scale electric RC cars with 48 pitch spur gears
• Motors with a standard pinion bore — verify bore diameter matches your motor shaft before fitting

What's Included

• 1 x Robinsons Racing RRP1024 48 pitch 24-tooth pinion gear